FC1000

Product outline

Specifications

Download

Product outline

SD card slot

You can write and read setting parameters from SD cards, while recording weighing results & data when abnormalities occur.

■ Calibration value & Error logs are automatically recorded
　You can identify the indications of faulty load cells and replacement timing.
　Date & time of errors occurred can be displayed, as well as the record of how the errors are made (through key control, communication, I/O, etc).

■ Data recording of weighing results
　Monitor management of raw material, equipment operation rate and so on.
　Long-term trend can be observed as well.

■ Restore setting parameters with just one touch
　・You can copy setting parameters to another replaced FC1000.
　・Multiple FC1000s can use the exact same settings.
　・You can restore the initial setting when you first install FC1000. (It will be saved as initial value separately from the setting parameters).

Depth of 99 mm

Miniaturization of control panel & panel space saving.

High performance filter & Auto filter adjustment

With combination of low pass filter (0.1 to 300 Hz) which corresponds to various vibration and moving average filter (OFF, 2 to 512) that is effective for periodic vibration, automatic searching for optimal value with accuracy and stability can be achieved. (You can manually adjust settings too).

Minus compensation

High-pressure liquid filling & powder feeding can be done.

Equivalent to IP65 protection

By placing the rubber seal when mounting on the panel, the front panel can be protected from moisture and dust damage.

High sampling rate & resolution

High performance digital low-pass filter can be adjusted at 0.1 Hz increment. As it is resistant to vibration, measurement can be　performed quickly and precisely.

Load cell signal level display (-2.5 mV/V to 5.1 mV/V)

The output signal level of load cell can be displayed in mV/V for monitor purpose.
Malfunction indicator or faulty sensor can be differentiated easily.

Total weight control function

The batch weighing with a low capacity scale enables the fast and accurate measurement of larger total weight.

Bright white LCD display with the useful 20 digits sub display

6 digit display

24 bit A/D convertor enables 6 digit display.

Memory for 32 weight settings

32 different weight settings can be saved in the memory and selected through I/O or interface.
Batch weighing can be performed easily.

Equivalent input calibration

Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.

Multipoint calibration (linearization)

Three additional points can be defined in the middle between zero and span for better linearity.
Even though the scale has poor linearity, it can be corrected to be a highly accurate scale.

Structure of product code

External dimension

Specifications

Analog section｜Display section｜Setting section｜External signal｜Interface｜General specifications｜Attachments

Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.

Download